 |
|
| Locations | Wireless Requirements | Client Configurations | FAQs | Future Expansion | Wireless Policy | Help | |
| UTEP>IT Department>Wireless Networking>Client Configurations>Windows XP SP2 | |
|
|
Wireless
setup for Windows XP SP2
1. Right Click on the wireless Icon in
the lower right hand side of the Desktop. 2. Select the
Open Network connections option. 3.
When the Network Connections window opens up, click on the Wireless
Network Connection one time to select it. 4. Right click
on the Wireless Network Connection to show the sub menu. Select the
Properties option. 5. In the
Wireless Network Connection Properties window, select the Wireless
Networks tab. 6. If not
checked, ensure that there is a check in the box labeled Use Windows
to configure my wireless network settings. 7. Click on
the Add button. 8. In the
Wireless network properties box, under the Association tab, in the
Network name (SSID) field, enter the following in lowercase letters
only. utepwl1 9. In the same
window, for the Data encryption drop down menu, select: Disabled 10. At this
point, this is all of the configuring required to gain access to the
UTEP wireless network. Press OK for any remaining opened windows.
11. From the
Wireless Network Connections Properties window, click on the Advanced
tab.
12. Under the
Advanced tab, in the Windows Firewall section, click on the Settings
button.
13. Ensure that the
On option is selected.
14. Click on the
Advanced tab.
15. Click on the
Wireless Network Connection to select.
16. Click on the
Settings button.
17. In the Advanced
settings window, click the ICMP tab. 18. If not
checked already, place a check in the box labeled: Allow incoming echo
request. 19.
Click on the OK
button.
20.In the Windows
Firewall window, under the ICMP section, click on the Settings button. 21.
If not
already checked, place a check in the box labeled, Allow incoming echo
request. 22.
Click OK
for any remaining open windows.
23. Open Internet Explorer and Click on Tools.
24. On the sub menu, select Internet Options. 25. In the Internet Options window, Click
on the Privacy tab. 26. In the Pop-up Blocker section, click the
Settings button. 27. In the Pop-up Blocker Settings window,
in the Address of Web site to allow: field, enter the following:
10.0.1.7 28. Click the Add button. 29. Click the Close button, and the OK buttons
for any remaining opened windows. (This part is necessary to log out of the
BlueSocket security gateway. This will allow the log out pop up
window to open upon initial authentication.)
|
